SUNFLEX SF25 frameless

Terrassen-/Balkonverglasung Sunflex_SF25 Schiebe-Dreh-System rahmenlos - Amasvista Glass
Terrassen-/Balkonverglasung Sunflex_SF25 Schiebe-Dreh-System rahmenlos - Amasvista Glass

enjoy your outdoor spaces without compromising your view

The Sunflex SF25 slide and turn system’s timeless design makes it suitable for outside enclosures, such as balconies, terraces and patios. Alternatively it can be used to create a flexible, contemporary and useable open space internally as room dividers for both living and working environments.
The first opening panel acts as a single access point, each individual panel then slides independently back across to the same side to stack. This allows you to have as much or as little of the glass wall open at any one time. The system can open to the inside or outside and stack to the left or the right or split to stack on both sides. The single in-line running track caters for a wide range of applications. This allows the glass panels to slide from 90° to any angle change up to 180°, including segmented curved radius openings.
An ideal product for all year round, keeping away the worst of the winter weather with minimum impact on a building’s design and during the summer months can be opened completely to make the most of these precious times.
system information / features

 

 

 

profile technology
  • frameless glass design
  • option of bottom track that can be recessed in to the floor for a flush finish or a drainage track ideal
  • according to DIN 18 025
  • inward or outward opening of the panels possible
  • choice of panel partition and sliding direction
  • height compensation of up to 22mm

certified tests
  • sound reduction with 10mm glass, with sealing strips, according to DIN EN ISO 10140-2 Rw=34dB
  • sound reduction with 10mm glass, without sealing strips, according to DIN EN ISO 10140-2 Rw=22dB
  • measurement of deflection class 3 according to EN 12211/12210 (8mm, 10mm glass)
  • wind suction class 3 according to EN 12211/12210 (8mm, 10 mm glass)
  • safety test class 3 according to EN 12211/12210 (8mm, 10 mm glass)

fitting technology
  • all fittings are concealed in the profiles
  • low-wear, non-corroding and low maintenance fittings
  • inside and/or outside locking and unlocking is possible
  • locking and unlocking by a user-friendly flat handle
  • the first panel may be equipped with a profile cylinder lock to prevent unauthorized opening

running gear system
  • horizontal running mechanism
  • low-noise, wear-resistant, heat- and cold-resistant running surface
  • all metal components of the running mechanism are made of stainless steel
  • the running mechanism consists of 3 smooth-running needle bearings & 2 carbon fibre reinforced polyamide wheels
  • the glass panels can be slided from 90° to any angle change up to 180°, including segmented curved radius openings

sealing & ventilation
  • gap of approximatively 2-4 mm between the panels
  • optionally with slim vertical transparent PVC seals which are coupled to the glass
  • double brush seal with plastic bridge at top and bottom of the glass panels
  • lower and upper brush gaskets are attached to the panel frames and not to the bottom track

glazing
  • supplied with toughened glass either 8mm or 10mm, depending upon height and requirements
  • panels are secured by a concealed screw-fixing system in the upper and lower profiles of each panel
  • subsequent replacement of the glasses is no problem

drainage
  • pressure-free drainage of bottom track by inclined floor construction
  • internal drainage channel track to remove any condensation or flush track option
  • end-caps for lateral sealing of the bottom track

Download

 

 

 

All information about the sliding door system SF20 are just one click away.